Question 2 of 12
You are configuring a new external virtual switch in your Windows Server 2012 R2 Hyper-V host.
Your hypervisor host has two physical network interfaces installed. You want the physical host to exclusively
use one network interface and virtual machines running on the host to exclusively use the other.
Click the option you would use to configure the virtual switch in this manner.
Connection type
What do you want to connect this virtual switch to?
@ External netv.,ork:
Broadcom Netxtreme 57xx Gigabit Controller
e Allow management operating system to share this network adapte1
0 Enable single’foot I /0 virtualization (SR-IOV)
0 Internal netv.,ork
0 Private network
VLAN ID
0 Enable virtual LAN identification for management operating system
Explanation
With two network adapters installed, one can be use by the physical host while the other is used only by virtual machines
running on the host. To do this, under External network, select the adapter you wish to use for the virtual switch and then
deselect Allow host OS to share the network adapter. This prevents the physical host from using the adapter.
The External network drop-down list is used to select a physical network adapter to be used by the virtual switch. The
Enable single-root 1/0 virtualization (SR-IOV) option allows virtual machines to directly use the network adapter
specified . The Enable virtual LAN identification for management operation system option allows you to configure the
virtual switch to function on a specific VLAN.
Objectives
Objectives for MS 70-41 0:
303 Create and configure virtual networks
References
LabSim for Windows Server Pro: Install and Configure, Section 3.3.
[Questions_new.exm Q24]